Call us: 805-383-1234   

Power Supplies : External - AC-DC - Desktop : uA30-1024 - 30W Medical Switching Adapter at eUrasia Power

Power Supplies : External - AC-DC - Desktop

30W Medical Switching Adapter

View Specifications in PDF Format
30W Medical Switching Adapter
90~260 VAC Continuous Universal Input


These 30W, switching adapter power supplies feature high overall efficiency and complete agency approvals (UL, C-UL, TUV GS, CE, PSE, BSMI, RCM & CB) as well as CEC-level IV efficiency for environmental friendly power management. These units also offer a compact size of 2.38" X 3.74" X 1.34". This series also features FCC & VDE class B EMI for consumer applications. Typical applications are telecommunications equipment, consumer products, Computers, Industrial Controllers, & Office Automation Systems.

RoHS and CEC efficiency level IV Compliance
Small Size / High Power Density
Continuous Universal Input - 85~264 VAC
High Efficiency up to 80%
Small size / high power density
FCC Class B & EN55011, EN55022 class B
Full Safety Agency Approvals
2.38 x 3.74 x 1.34 inch
58 x 95 x 34 mm
Rated Load1.25A / 1.8A pk
View Specifications in PDF Format
Input VAC
Voltage, V 85-264 continuous
Frequency, Hz 47-63
Current, A inrush I <30A at 115VAC; <60A at 230VAC
Power Factor N/A
Harmonics N/A
Cooling Free air convection
Power Good N/A
Holdup Time 16 mS minimum @ 115 VAC, full load
Transient N/A
Efficiency Up to 80% at full load depending on model
Shorted output No damage, auto-recovery
Over Load Protection auto-recovery
Short Circuit Protection auto-recovery
Over Voltage Protection auto-recovery
EMS Consult Factory
Temperature 0 to 45 deg C
EMI FCC class B; CE level B
Safety Agency UL / CUL / GS / PSE / BSMI / RCM / CB

Go to top
1. Output can provide up to peak load when the power supply starts up. Continuously exceeding the rated load is not allowed.
2. Ouput voltage is centered at the factory, at 60% of rated load.
3. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line.
4. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line.
5. Efficiency is measured at rated load, and nominal line.


Click here to view a printer friendly mechanical drawing.
30W Medical Switching Adapter

Return to product index

The information and specifications contained in this data sheet are believed to be accurate at the time of publication. If errors are found, they will be corrected. Consequently, specifications may be subject to change without notice.