1. Nominal Input Voltage 72 VDC
2. An External Input Capacitor 100uF for All Models are Recommended to Reduce Input
Ripple Voltage
3. An External Electrolytic Capacitor at Least 240uF connect Between BUS and -Vin
is Necessary
4. All Specifications are Typical at Nominal Input, Full Load at 25℃. Unless Otherwise Noted.
5. Ripple & Noise Measured at Full load, 10uF tantalum and 1uF ceramic capacitors
(for Vo=48V: Full Load 10uF aluminum and 1uF ceramic capacitors).
6. Remote ON/OFF Logic Compatibility.......Open collector Refer To -V Pin
Suffix = Blank, Positive Remote Logic.
Logic Low (Module OFF)................. 0 to < 1.2V
Logic High (Module ON).................. 3.5 to <160V
Suffix = N, Negative Remote Logic.
Logic High (Module OFF)................. 3.5 to <160V
Logic Low (Module ON)................. 0 to < 1.2V