© 2024 Eurasia Power
eDUHB200-92 eDUHB200 Series 200 Watts Half Brick Type 12:1 High Input Voltage Isolated DC-DC Converters
Series: eDUHB200
SKU: eDUHB200-92
Application: IT & Industrial
Form Factor: Half Brick
Type: DC-DC
Features
Fully Protected (OTP/OCP/OVP/UVLO) /5000m Operating Altitude
3000Vac I/O Isolation /Regulated Outputs
Fixed 480KHz Switching Frequency
Shock & Vibration EN50155 (EN61373) Compliant
Fire & Smoke EN45545-2 Compliant
EN50155 Compliant With External Circuit
Special Notes
- Nominal Input Voltage 72 VDC
- An External Input Capacitor 100µF for All Models are Recommended to Reduce Input Ripple Voltage
- An External Electrolytic Capacitor at Least 240µF connect Between BUS and -Vin is Necessary
- All Specifications are Typical at Nominal Input, Full Load at 25°C Unless Otherwise Noted.
- Ripple & Noise Measured at Full Load, 10µF tantalum and 1µF ceramic capacitors (for Vo=48V: Full Load 10µF aluminum and 1µF ceramic capacitors).
- Remote ON/OFF Logic Compatibility.......Open collector Refer To -V Pin
Suffix = Blank, Positive Remote Logic.
Logic Low (Module OFF)..................0 to < 1.2V
Logic High (Module ON)..................3.5 to < 160V
Suffix = N, Negative Remote Logic.
Logic High (Module OFF)..................3.5 to < 160V
Logic Low (Module ON)..................0 to < 1.2V
Input
Voltage: 14-160 VDC
Current: No Load Input Current: 50mA
Output
O/P Voltage: 12V
O/P Current: 16.7A
Watts: 200W
Ripple & Noise: Measured at Full Load, 10µF tantalum and 1µF ceramic capacitors (for Vo=48V: Full Load 10µF aluminum and 1µF ceramic capacitors
Load Regulation: Full to No load: ±0.2% max.
Electrical
Efficiency: 90%
Operating Temperature: -40°C to +100°C
Storage Temperature: -55°C to +125°C
Dimensions: L 61mm x W 57.90mm x H 12.70mm | 2.4in x 2.28in x 0.50in