SNP-Z309 300W U-Channel with Active PFC
Series: SNP-Z30
SKU: SNP-Z309
Application: IT & Industrial
Form Factor: Open Frame, U-Bracket, U-Channel
Output
No of Outputs: Outputs 2
O/P Voltage: 24V
, 5V
O/P Current: 12A
, 2A

Skynet`s new SNP-Z3 series packs 300W of high efficiency power in a 1U package while maintaining excellent thermal performance. This is made possible by Skynet`s patent pending soft-switching topology which offers up to 87% efficiency in an offline (AC-DC) switcher!

Features

• 300W Continuous output power in a 1U form factor
• Up to 90% efficiency!
• Active power factor correction
• Meets IEC-1000-3-2 harmonics
• EMI: EN55022 Class B
• Safety UL 60950; CSA 22.2 No. 234; EN60950

Size

5 x 9 x 1.6 inch
127 x 228.6 x 40.6 mm

Specifications

Input VAC
Voltage, V 90-264 continuous
Frequency, Hz 47-63
Current, A 8A @ 120V / 4A @ 240V
Power Factor 0.95 minimum at max load
Harmonics EN61000-3-2
Cooling convection cooled
Power Good TTL compatible
Holdup Time 20ms, nominal line, full load
Transient Return to 1% in 1ms, 20% load step at 0.5A/us slew rate
Efficiency 68% at full load, typical
Shorted output No damage
Over Load Protection Auto-recovery
Short Circuit Protection Auto-recovery
Over Voltage Protection Latch off
EMS EN61000-4-2,-3,-4,-5,-6,-8,-11
Temperature 0 to 50 degrees C
EMI EN55022
Safety Agency UL 60950

DC Outputs

Output +24V +5V
Max Load 12A / 15A pk. 2A
Regulation ±1% ±1%
Ripple 200mV 50mV

Notes

1. The total output current is rated load with free air convection and maximum load.
2. Each output is checked at the factory to be within voltage accuracy with a 60% rated load condition.
3. Line regulation is defined by changing the input voltage ±10% from nominal line at rated load.
4. Load regulation is defined by changing the output load ± 40% from 60% of the rated load while another output is set to 60% of rated load.
5. Ripple & noise is measured at rated load and nominal line by using a 15MHz bandwidth limited oscilloscope with each output terminated by a 0.47 uF capacitor.
6. Hold up time is measured from the end of the last charging pulse to when the main output drops down to 95% output voltage.
7. Efficiency is measured at rated load.

Mechanical