The eU80 series of AC/DC switching mode power supplies provide 80 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part- 15 class B and CISPR-22 class B emission Limits and are designed to comply with UL, C-UL, TUV and CE requirements. All units are 100% burned in and tested.
Features
• Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
• IEC-320-C14 Input Inlet
• Single to Quad Output
• Output Voltage Available From 3 VDC Thru 48 VDC
• Optional Output Connector (See appendix)
• Input Surge Current, Over Voltage and Over Load protection
• Splash proof
• Class I Insulation
• Two Years Warranty
• IEC-320-C14 Input Inlet
• Single to Quad Output
• Output Voltage Available From 3 VDC Thru 48 VDC
• Optional Output Connector (See appendix)
• Input Surge Current, Over Voltage and Over Load protection
• Splash proof
• Class I Insulation
• Two Years Warranty
Size
3.1 x 6.6 x 1.25 inch
78.5 x 168 x 44.5 mm
78.5 x 168 x 44.5 mm
DC Outputs
| Output, V | 35 |
| Max Load, A | 2.29 |
| Regulation, % | +/-5% |
| Ripple, mV | 120 |
Specifications
| Input | VAC |
| Voltage, V | 90-264 continuous |
| Frequency, Hz | 47-63 |
| Current, A | 1.5A at 90VAC, 0.75A at 180 VAC |
| Power Factor | N/A |
| Harmonics | N/A |
 |
|
| Cooling | Free air convection |
| Power Good | N/A |
| Holdup Time | 16 mS minimum @ 115 VAC, full load |
| Transient | N/A |
| Efficiency | 75% typical at full load |
| Shorted output | No damage, auto-recovery |
| Over Load Protection | 4A +/- 0.4A, auto-recovery |
| Short Circuit Protection | auto-recovery |
| Over Voltage Protection | auto-recovery |
| EMS | Consult Factory |
| Temperature | 0 to 40 deg C |
| EMI | CISPR / FCC class B |
| Safety Agency | UL1950, CSA C22.2 and EN60950 with C.B. Certificate |
Notes
1. Ripple & Noise – Use 20 M Hz frequency bandwidth oscilloscope.
2. Add 0.1Uf / 47uF capacitors at output connector terminal for Ripple & Noise test.
3. Ripple Noise test condition: 90V / 60Hz, output 3.6A.
4. Ripple with spike noise <=300 mV p-p.
2. Add 0.1Uf / 47uF capacitors at output connector terminal for Ripple & Noise test.
3. Ripple Noise test condition: 90V / 60Hz, output 3.6A.
4. Ripple with spike noise <=300 mV p-p.
Mechanical
