Current: 33Amps max. at 115VAC, full load & 55Amps max. at 230VAC, full load
Line Frequency: 47-63Hz
O/P Voltage: 48V
No of Outputs: Outputs 1
Environmental
Green Mode: --
Electrical
O/P Current: 5A
Watts: 240W
Mechanical
Ripple & Noise: 120mVp-p
Load Regulation: ±1.0%
Protection: Short Circuit/Over Load/Over Voltage/Over Temperature
Efficiency: 93%
Operating Temperature: -25℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
EMC Standards: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level
Additional Information
All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured from peak to peak with bandwidth limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
It could hold up 3 seconds max when reached peak power 360W, please refer to peak loading curves.
Derating may be needed under low input voltage. Please check the derating curve for more details.
After 30 minutes of burn-in.
The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m (6500ft).
