YSDN150-24006250 Ultra-slim Step Shape DIN Rail Power Supply
Series: YSDN Series
SKU: YSDN150-48002500
Application: DIN Rail
Form Factor: DIN Rail
Type: DIN Rail
Features
DC O/P Voltage Adjustable
Universal AC Input 90-264V
Protections: Short circuit/Overload/Over Voltage/Over Temperature
Free Air Convection Design
Installation: DIN Rail TS-35/7.5 & 15
Three-year Warranty
Special Notes
  1. All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured from peak to peak with band width limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
  3. Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
  4. Derating may be needed under low input voltage. Please check the derating curve for more details.
  5. Efficiency test after 30 minutes of burn-in.
  6. The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m(6500ft).
Input
Voltage: 200-240VAC
Line Frequency: 47-63Hz
Current: 47.8Amps max. at 115VAC, full load & 92.5Amps max. at 230VAC, full load
Output
No of Outputs: Outputs 1
O/P Voltage: 24V
O/P Current: 6.25A
Watts: 150W
Ripple & Noise: 150mVp-p
Hold-up Time: 16ms/230VAC at full load & 10ms/115VAC at full load
Protection: Short Circuit/Overload/Over Voltage/Over Temperature
Electrical
Efficiency: 87%
EMC Standards: Compliance to BS EN/EN55032, BS EN/EN61000-3-2,-3
Operating Temperature: -20℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Mechanical
Dimensions: 125mm x 40mm x 113mm / 4.92in x 1.57in x 4.45in
Weight: 600g | 0.6kg