Protections: Short circuit/Overload/Over Voltage/Over Temperature
Free Air Convection Design
Installation: DIN Rail TS-35/7.5 & 15
Three-year Warranty
Input
Voltage: 100-120VAC
All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured from peak to peak with band width limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
Derating may be needed under low input voltage. Please check the derating curve for more details.
Efficiency test after 30 minutes of burn-in.
The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m(6500ft).
Output
Current: 47.8Amps max. at 115VAC, full load & 92.5Amps max. at 230VAC, full load
Line Frequency: 47-63Hz
O/P Voltage: 48V
No of Outputs: Outputs 1
Environmental
O/P Current: 2.5A
Watts: 120W
Mechanical
Hold-up Time: 16ms/230VAC at full load & 10ms/115VAC at full load
Ripple & Noise: 150mVp-p
Load Regulation: ±1.0%
Protection: Short Circuit/Overload/Over Voltage/Over Temperature
Efficiency: 89%
Operating Temperature: -20℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Safety Agency: UL508, BS/EN62368-1
EMC Standards: Compliance to BS EN/EN55032, BS EN/EN61000-3-2,-3
