YSDN240-48005000 Ultra-slim Step Shape DIN Rail Power Supply

SKU: YSDN240-48005000
Series: YSDN Series
Application: DIN Rail
Type: DIN Rail
Form Factor: DIN Rail
Dimensions: 125mm x 63mm x 113.5mm / 4.92in x 2.48in x 4.47in
Weight: 1kg
Special Notes
DC O/P Voltage Adjustable
Universal AC Input 90-264V
Protections: Short circuit/Overload/Over Voltage/Over Temperature
Free Air Convection Design
Installation: DIN Rail TS-35/7.5 & 15
With build-in active PFC function
Three-year Warranty
Input
Voltage: 100-240VAC
Output
Current: 37.2Amps max. at 115VAC, full load & 70Amps max. at 230VAC, full load
Line Frequency: 47-63Hz
O/P Voltage: 48V
No of Outputs: Outputs 1
Environmental
Green Mode: --
Electrical
O/P Current: 5A
Watts: 240W
Mechanical
Hold-up Time: 16mS(230V/50HZ full load) & 12mS(115V/60HZ full load)
Ripple & Noise: 150mVp-p
Load Regulation: ±1.0%
Protection: Short Circuit/Overload/Over Voltage/Over Temperature
Efficiency: 88%
Operating Temperature: -20℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Safety Agency: UL508, BS/EN62368-1
EMC Standards: Compliance to BS EN/EN55032, BS EN/EN61000-3-2,-3
Additional Information
  1. All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured from peak to peak with band width limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
  3. Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
  4. Derating may be needed under low input voltage. Please check the derating curve for more details.
  5. Efficiency test after 30 minutes of burn-in.
  6. The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m(6500ft).

Contact Sales

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*