eDHFB600-C9BN eDHFB600 Series 600 Watts Full Brick Type 2:1 High Input Voltage Isolated DC-DC Converters
Series: eDHFB600
SKU: eDHFB600-C9BN
Application: IT & Industrial
Form Factor: Full Brick
Type: DC-DC
Features
Industry Full-Brick Package
3000VAC I/O Isolation / Regulated Outputs
Fixed 200KHz Switching Frequency
Over Voltage / Current / Temperature Protection
Input Under Voltage Protection
Remote On/Off & Single Wire Parallel
Special Notes
- All Specifications Typical at Nominal Line, Full Load, and 25°C. Unless Otherwise Noted.
- Nominal Input Voltage 300 VDC.
- Output Ripple & Noise Measured with Min. Capacitor 470μF & 1μF Ceramic Capacitor Across Output
- The Output Adjustment Circuit and Trim Equations as Figure 1 and Figure 2.
- An External Input Capacitor 300μF for All Models Are Recommended to Reduce Input Ripple Voltage.
- Remote ON/OFF Logic Compatibility.......Open collector Ref. To-V Pin
Suffix = Blank, Positive Remote Logic.
Mode ON..........................>3.5Vdc to 75Vdc or Open circuit
Module OFF......................0 to < 1.2Vdc
Suffix = N, Negative Remote Logic.
Module ON..........................0 to < 1.2Vdc
Module OFF.........................>3/5Vdc to 75Vdc or Open Circuit
Input
Voltage: 180-425 VDC
Current: No Load Input Current: 10mA
Output
O/P Voltage: 48V
O/P Current: 12.5A
Watts: 600W
Ripple & Noise: 200mV RMS, 480mVpK-pK max.
Transient: 25% step load change ... < 500μs
Load Regulation: ± 0.5% max
Electrical
Efficiency: 91%
Operating Temperature: -40°C To +100°C
Storage Temperature: -55°C to +105°C
Mechanical
Dimensions: 4.6" x 2.4" x 0.5"
Weight: 230g