eDUHB200-99B eDUHB200 Series 200 Watts Half Brick Type 12:1 High Input Voltage Isolated DC-DC Converters

SKU: eDUHB200-99B

Series: eDUHB200

Application: IT & Industrial

Type: DC-DC

Form Factor: Half Brick

Dimensions: L 61mm x W 57.90mm x H 12.70mm | 2.4in x 2.28in x 0.50in

Special Notes

Fully Protected (OTP/OCP/OVP/UVLO) /5000m Operating Altitude

3000Vac I/O Isolation /Regulated Outputs

Fixed 480KHz Switching Frequency

Shock & Vibration EN50155 (EN61373) Compliant

Fire & Smoke EN45545-2 Compliant

EN50155 Compliant With External Circuit

Input

Voltage: 14-160 VDC

Nominal Input Voltage 72 VDC
An External Input Capacitor 100µF for All Models are Recommended to Reduce Input Ripple Voltage
An External Electrolytic Capacitor at Least 240µF connect Between BUS and -Vin is Necessary
All Specifications are Typical at Nominal Input, Full Load at 25°C Unless Otherwise Noted.
Ripple & Noise Measured at Full Load, 10µF tantalum and 1µF ceramic capacitors (for Vo=48V: Full Load 10µF aluminum and 1µF ceramic capacitors).
Remote ON/OFF Logic Compatibility.......Open collector Refer To -V Pin
Suffix = Blank, Positive Remote Logic.
Logic Low (Module OFF)..................0 to < 1.2V
Logic High (Module ON)..................3.5 to < 160V
Suffix = N, Negative Remote Logic.
Logic High (Module OFF)..................3.5 to < 160V
Logic Low (Module ON)..................0 to < 1.2V

Output

Current: No Load Input Current: 50mA

O/P Voltage: 48V

Environmental

O/P Current: 4.2A

Watts: 200W

Ripple & Noise: Measured at Full Load, 10µF tantalum and 1µF ceramic capacitors (for Vo=48V: Full Load 10µF aluminum and 1µF ceramic capacitors

Load Regulation: Full to No load: ±0.2% max.

Efficiency: 89%

Operating Temperature: -40°C to +100°C

Storage Temperature: -55°C to +125°C

Additional Information