YSDH120-12010000 Ultra-slim Step Shape DIN Rail Power Supply
Series: YSDH Series
SKU: YSDH120-12010000
Application: DIN Rail
Form Factor: DIN Rail
Type: DIN Rail
Higher Peak Power
Built-in active PFC function
Built-in DC OK relay contact
DC output voltage adjustable
100% full load burn-in test
Three-year warranty
Special Notes
  1. All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured from peak to peak with bandwidth limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
  3. Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
  4. It could hold up 3 seconds max when reached peak power 180W, please refer to peak loading curves.
  5. Derating may be needed under low input voltage. Please check the derating curve for more details.
  6. After 30 minutes of burn-in.
  7. The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m (6500ft).
Voltage: 100-240VAC
Line Frequency: 47-63Hz
Current: 35Amps max. at 115VAC, full load & 70Amps max. at 230VAC, full load
No of Outputs: Outputs 1
O/P Voltage: 12V
O/P Current: 10A
Watts: 120W
Ripple & Noise: 100mVp-p
Protection: Short Circuit/Over Load/Over Voltage/Over Temperature
Load Regulation: ±1.0%
Efficiency: 89%
EMC Standards: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level
Operating Temperature: -25℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Dimensions: 113mm x 40mm x 125mm | 4.45in x 4.92in x 1.57in
Weight: 0.67kg