© 2023 Eurasia Power
YSDN480-48010000 Ultra-slim Step Shape DIN Rail Power Supply
Series: YSDN Series
Application: DIN Rail
Form Factor: DIN Rail
Type: DIN Rail
DC O/P Voltage Adjustable
Universal AC Input 90-264V
Protections: Short circuit/Overload/Over Voltage/Over Temperature
Free Air Convection Design
Installation: DIN Rail TS-35/7.5 & 15
With build-in active PFC function
- All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
- Ripple & noise are measured from peak to peak with band width limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
- Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
- Derating may be needed under low input voltage. Please check the derating curve for more details.
- Efficiency test after 30 minutes of burn-in.
- The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m(6500ft).
Line Frequency: 50/60Hz
Current: 20Amps max. at 115VAC, full load & 35Amps max. at 230VAC, full load
No of Outputs: Outputs 1
O/P Voltage: 48V
O/P Current: 10A
Ripple & Noise: 160mVp-p
Hold-up Time: 16ms/230VAC at full load & 16ms/115VAC at full load
Protection: Short Circuit/Overload/Over Voltage/Over Temperature
Load Regulation: ±1.0%
Safety Agency: UL508, BS/EN62368-1
EMC Standards: Compliance to BS EN/EN55032, BS EN/EN61000-3-2,-3
Operating Temperature: -20℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Dimensions: 125mm x 85.5mm x 129mm / 4.92in x 3.37in x 5.08in