YSDW120-24005000 Ultra-slim Step Shape DIN Rail Power Supply
Series: YSDW Series
SKU: YSDW120-24005000
Application: DIN Rail
Form Factor: DIN Rail
Type: DIN Rail
Features
Single and Two Phase Ultra Wide Input Range 180~550VAC
Over Voltage Category III
Built-in DC OK Relay Contact
DC Output Voltage Adjustable
Built-in Constant Current Limiting Circuit
Three-year Warranty
Special Notes
  1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25℃ of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
  3. Tolerance: includes set up tolerance, line regulation and load regulation.
  4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
  5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply vary quick may lead to increase of the set up time.
  6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
Input
Voltage: 200-500VAC
Line Frequency: 47-63Hz
Current: COLD START 50Amps
Output
No of Outputs: Outputs 1
O/P Voltage: 24V
O/P Current: 5A
Watts: 120W
Ripple & Noise: 120mVp-p
Hold-up Time: 50ms/400VAC at full load & 10ms/230VAC at full load
Load Regulation: ±0.5%
Electrical
Efficiency: 91.0%/400VAC
Safety Agency: UL508, approved, IEC62368-1 CB approved by SIQ; Design refer to BS EN/EN62368-1, AS/NZS 62368.1 EAC TP 004 (meet BS EN/EN60204-1)
EMC Standards: Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, EAC TP TC 020.
Operating Temperature: -25℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Mechanical
Dimensions: 126.5mm x 40mm x 113mm / 4.98in x 1.57in x 4.45in
Weight: 650g / 0.65kg