© 2024 Eurasia Power
YSDN75-4801600 Ultra-slim Step Shape DIN Rail Power Supply
Series: YSDN Series
SKU: YSDN75-4801600
Application: DIN Rail
Form Factor: DIN Rail
Type: DIN Rail
Features
DC O/P Voltage Adjustable
Universal AC Input 90-264V
Protections: Short circuit/Overload/Over Voltage/Over Temperature
Free Air Convection Design
Installation: DIN Rail TS-35/7.5 & 15
Three-year Warranty
Special Notes
- All parameters NOT specially mentioned at 230VAC input, rated load and 25℃ of ambient temperature.
- Ripple & noise are measured from peak to peak with band width limit of 20MHz (0.1uF and 47uF/50V parallel capacitor under DC output full load, AC nominal input 25℃ ambient temperature).
- Installation clearances: top with 40mm, bottom with 20mm, left and right with 5mm. Increase the space to 10-15mm when the adjacent device is heat source.
- Derating may be needed under low input voltage. Please check the derating curve for more details.
- Efficiency test after 30 minutes of burn-in.
- The ambient temperature derating of 3.5℃/1000m for operating altitude higher than 2000m(6500ft).
Input
Voltage: 100-120VAC
Line Frequency: 47-63Hz
Current: 95Amps max. at 115VAC, full load & 41Amps max. at 230VAC, full load
Output
No of Outputs: Outputs 1
O/P Voltage: 48V
O/P Current: 1.6A
Watts: 76.8W
Ripple & Noise: 150mVp-p
Hold-up Time: 60mS/230VAC at full load & 12mS/115VAC at full load
Protection: Short Circuit/Overload/Over Voltage/Over Temperature
Load Regulation: ±1.0%
Electrical
Efficiency: 88.00%
Safety Agency: UL508, BS/EN62368-1
EMC Standards: Compliance to BS EN/EN55032, BS EN/EN61000-3-2,-3
Operating Temperature: -20℃ to 70℃ (Refer to "Derating Curve")
Storage Temperature: -40°C to 85°C
Mechanical
Dimensions: 125mm x 32mm x 100.5mm / 4.92in x 1.26in x 3.96in
Weight: 510g | 0.51kg